茂丰光电

产品特点：

1、更便宜，更紧凑的微型步进电机驱动器。

2、采用了光耦合器输入电路。

3、小型化，适合装入低振动或轻量振动的设备中

MC-S5ML规格表：

功能图

外形尺寸图（单位：mm)

接线图

设置驱动电流

To obtain the desired drive current,connect a potentiometer to CP(+,-)and use the following formula:

Potentiometer voltage(V) = Desired drive current×2

Factory setting is 1.4A/phase.

① Turn RUN Volume Control all the way to the left before the system is powered.

② Insert the cw signal (or the ccw signal )with a frequency of 10 pps or more, slowly turn the run volume andadjust it to

the calculated voltage value. (Caution: Motor starts ｔｏ rotate once the signal is input)

③ At the Motor Standstill, the output current will be automatically reduced to 50% of the set current.

延迟 SW 说明

外形尺寸图（单位：mm）

接线图

马达

输入电路